ferrule design
1 페룰은 최대 스핀으로 하드샷 시 견딜 수 있는 힘의 더 나은 분포를 보장합니다. 샤프트-바디와의 접촉면이 넓어지며 모든 조건에서 완벽한 피드백을 제공합니다. 각 페룰은 특수 CNC 센터에서 G10으로 가공되어 매우 높은 정확도와 최대 신뢰성을 위해 가장 타이트한 핏을 보장합니다.
2 A Kevlar pad is fitted between the ferrule and the tip as tip-support. This helps to evenly distribute the impact-forces over the entire surface of the Trident® ferrule and dampens the vibrations transferred to the shaft-body.
3 The lightweight construction allows for shafts with very low deflection properties but at the same time retaining the necessary strength and stability.
Shaft body
4 Whereas most composite shafts are manufactured by wrapping “Prepreg” sheets of composite fibers over a steel core and finishing the outside of the tube by sanding, we noted this technique resulted in a too wide variation in “wall thickness” and consequently uneven radial consistency. A new technique was developed resulting in a wall-thickness variation limited to +/- 0,1 mm over the full length of the shaft-body: guaranteeing 100% radial consistency.
5 Our in-house production technique allows for an infinite variation of shapes, wall thicknesses, and materials; we are able to build shafts exactly to any players’ requirements.
Collar design
6 We offer three stunning ring colors — cyan, magma dragon, and black — according to your preferences.
joint system
7 We equip your shaft with one of the most widely used joint systems: Uni-loc® or Radial, ensuring reliability.
FERRULE DESIGN
This ferrule ensures a better distribution of the forces endured during hard shots with maximum spin. It provides for a larger contact-surface with the shaft-body and results in perfect feedback in all conditions.
Each ferrule is machined from G10 on a specialty CNC-center, guaranteeing a very high accuracy and the tightest possible fit for maximum reliability.
A Kevlar pad is fitted between the ferrule and the tip as tip-support. This helps to evenly distribute the impact-forces over the entire surface of the Trident® ferrule and dampens the vibrations transferred to the shaft-body.
The lightweight construction allows for shafts with very low-deflection properties but at the same time retaining the necessary strength and stability.
SHAFT BODY
Our in-house production technique allows for an infinite variation of shapes, wall thicknesses, and materials; we are able to build shafts exactly to any players’ requirements.
COLLAR DESIGN
조인트 시스템
샤프트에 가장 널리 사용되는 조인트 시스템 중 하나를 장착합니다: Uni-loc® or Radial, 안정성 보장.
